Made in U.S.A.

FEATURES

• Impact resistant polymer construction provides light weight and resists operational abuse
• Spring-loaded flip up sight easily activated from either side or by pressing the top
• Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
• Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* and provides the same height-over-bore as standard A2 irons
• Protective wings shield the spring-locking A2 front sight post
• Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well
• MBUS – Front
  • Weight, w/ hardware: 1.2 oz.
  • Height above rail, stowed: ~0.51 in.
  • Length, stowed: 2.6 in.
  • Length, deployed: 1.5 in.

  ELEVATION ADJUSTMENT

  • ~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius
  • ~1.2 MOA (1.367″/100m) per click with a 20″ sight radius

  *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.