Top 10 Most Popular Thunder Tactical Products

Description:

• 7075-T6 forging created in the United States.
• fully broached, ensuring a perfect fit.
• Forged from 7075-T6 aluminum

2. 80% Lowers – 5 Pack

• These 80 percent lower receivers for sale are machined to mil-spec (military standard) tolerances.
• The magwells on these 80 percent lowers are fully broached for the perfect fit every time.
• They require additional machining for completion.
• Includes five standard lowers
• Machined to mil-spec tolerances
• Forged from 7075-T6 aluminum

3. T19 Complete 80% Build Kit Ribbed Skeleton Slide – RMR CUT

T19 Frame and Jig Kit 80% Compact Pistol Frame Kit – PF940C

The 80% Compact Pistol Frame offers the compatibility with T 19/23 Gen3 components, the PF940C™ is an industry first. Features like the extended beavertail double undercut trigger guard, and a thumb ledge considerably enhances the ergonomics allowing for an effective grip and improved recoil mitigation.

Product Overview:

• Enhanced Ergonomics and Features
• High-Strength Reinforced Polymer Construction
• Aggressive and Adaptable Grip Texture
• Picatinny/STANAG Compliant Accessory Rail
• Blank Serialization Plate
• Stainless Steel Locking Block Rail System (LBRS™)
• Stainless Steel Rear Rail Module (RRM™)
• Hardened Pins for LBRS ™ and RRM™
• Complete Finishing Jig, Drill bits, and End Mill Included
• Compatible with T 19/23 Gen3 Components

T19 Slide

• Lightweight slide with custom cutouts
• T19 slides
• Fits Gen 1,2 and 3
• Can fit on T19 and T23 with a conversion barrel

Stripped Slide Features:Gen 3 compatibility (Works with all Polymer compact sized 19 frames)

• Trijicon RMR Cut – Utilizes (2) 4-40 x 3/8″ screws (4-40 screws not included as these will come with the RMR sight or mount)
• Black nitride finish
• Accepts standard T19 sights (not included)
• Made from 4150

This slide is meant to be used with T9mm barrels only.

The Upper Slide Parts Kit for the T19 pistols includes all of the parts you need to build your slide assembly

Firing pin

• Firing pin spring
• Barrel
• Spacer sleeve
• Firing pin spring cups
• Extractor depressor plunger
• Extractor depressor plunger spring
• Spring-loaded bearing
• Firing pin safety
• Firing pin safety spring
• Extractor
• Channel Liner
• Recoil Spring

These are all factory OEM parts from T19.

Factory T19 19 Gen-3 9mm Lower Parts Kit. Fits any T19 Gen-3 or P80 Compact-Size 9mm/40 frame.

• Slide Lock (Aftermarket)
• Slide Stop Lever (T19)
• Magazine Catch (T19)
• Trigger Spring 5lbs (T19)
• Trigger with Trigger Bar (T19)
• Trigger Housing with Ejector 9mm (T19)
• Trigger Connector 5lbs (T19)
• Slide Lock Spring (T19)
• Magazine Catch Spring (T19)
• Trigger Housing Pin (T19)
• Locking Block Pin (T19)
• Trigger Pin (T19)

These are genuine T19 Gen 3 factory parts for T Gen 1-3 19s or Polymer 80 Compact frames.

3..300 Blackout Upper Assembly 10.5″ Phosphate Barrel 10″ Quad Rail

This is a complete AR-15 upper receiver kit with a 10″ Quad Rail and 10.5″ Blackout Barrel

The parts included are below:

• 10.5″ Stainless 1/8 twist .300 Blackout Barrel
• Barrel Thread – 1/2″ x 28
• 10″ Quad Rail Hand Guard
• Gas Tube, and low pro gas block
• Ejection Port Cover
• Charging Handle
• Forward Assist
• Flash Suppressor with Crush Washer
• M-16 Bolt Carrier Group
• Black Anodized

4..300 Blackout Pistol Kit Assembly 7.5″Phosphate Barrel 7″ Slim Rail (NO LOWER RECEIVER)

This is a completely assembled AR-15 upper receiver without a 80% AR-15 lower receiver.

All of our completely assembled uppers are test fired for cycling.

The parts included are below:

AR-15 Upper Receiver

• 7.5″ Phosphate Barrel 1/7 twist 300 Blackout
• 7″ Rail Hand Guard
• Pistol Barrel Length Gas Tube, and low pro gas block
• Forward Assist
• Ejection Port Cover
• Charging Handle
• M-16 Bolt Carrier Group
• Flash Hider with Crush Washer

AR-15 Lower Parts

• Complete Pistol Buffer Tube Assembly with Cushioned Grip
• Lower Parts Kit

This is not a complete receiver and still requires machining to be done.

5. AR-15 Rifle Kit, 16” Phosphate Barrel 12” Quad Rail / NO 80% Lower

• If you’re building your own AR-15, this rifle kit is a great option.
• The upper and lower receivers in this rifle kit are black hardcoat anodized.
• All AR-15 parts offered online at Thunder Tactical are machined to mil spec tolerances.
• Proper cycling is ensured because we test fire all fully assembled uppers.

This AR-15 rifle kit for sale is great for the gunsmith looking for a little bit of a longer barrel. The AR-15 parts included in the assembled .223/5.56 upper include the following:

• 16″ Barrel Phosphate, .223 Wylde
• 12″ Quad Rail
• Low pro gas block
• Rifle Length Gas Tube
• Forward Assist
• Ejection Port Cover
• Charging Handle
• M-16 Bolt Carrier Group
• A2 Flash Hider with Crush Washer

Also included in this rifle kit are a six-position stock with buffer, buffer tube, and spring, and a lower parts kit to complete your lower. Keep shopping our gun parts online to discover what else we have to offer among our selection of pistol and rifle parts.

• Black Anodized

6. 15″ Keymod Rail Handguard